What do you know about the Indoor Fixed LED Screen?

Indoor Fixed LED Screen adopts low-voltage scanning drive, which has the advantages of low power consumption, long service life, low cost, high brightness, large viewing angle, long viewing distance, waterproof, and multiple specifications, which can meet various application scenarios. Demand, development prospects are very broad, recognized as the most promising and fastest growing LED application market.

What is the scope of use of Indoor Fixed LED Screen?

How to fix Indoor Fixed LED Screen on the wall?

What kind of Indoor Fixed LED Screen should we choose?

What is the scope of use of Indoor Fixed LED Screen?

First of all, Indoor Fixed LED Screen is made into a dot matrix module or digital tube from the light-emitting die in the production process, and then the modules are spliced into a display unit board of a certain size, and then according to user requirements, the display unit board is used as the basic unit to splice into the user One size required. We all know that the Indoor Fixed LED Screen area is generally a relatively large square area. Indoor LED displays are usually used in indoor environments, but they can also be used outdoors, but the display effect is relatively not as good as outdoors. This type of display screen is more suitable for use at close distances with moderate brightness, large viewing angle, short color mixing distance, light weight, and high density.

How to fix Indoor Fixed LED Screen on the wall?

1. Like the split air conditioner indoor unit, open the hook opening on the wall side of the Indoor Fixed LED Screen, just like the big side of the bed frame should be hung to the foot of the bed, and the two sides of the bottom plate are hook-shaped.

2. Use a glue adhesive to fix the bottom of the glass exterior wall. This glue is called: shadowless water.

3. How to use shadowless water: clean the glass surface, apply shadowless water to the glass surface and the contact surface of the Indoor Fixed LED Screen on the adherend to be smooth and flat, and then use a purple light to illuminate the other side of the glass. After 1 minute, after the adherend is stuck tightly, the display can be hung up without falling.

What kind of Indoor Fixed LED Screen should we choose?

1. Equality: The surface level of the permanently installed LED screen for the interior should be within one millimeter to ensure that the displayed image is not distorted. Local advances or indentations cause a dead angle in the viewing angle of the display. The quality of equality is mainly determined by the production process.

2. Brightness and angle of view: The brightness of the permanently installed Indoor Fixed LED Screenmust be above 800 cd/sqm and the brightness of the outdoor full-color screen must be above 1500 cd/sqm to ensure normal operation of the permanently installed Indoor Fixed LED Screen, Otherwise the brightness is too low and the displayed image cannot be seen. The brightness is mainly determined by the quality of the LED chip. The viewing angle of the Indoor Fixed LED Screen directly determines the audience of the screen, so the bigger the better. The size of the viewing angle is determined mainly by the packaging method of the chip.

"People-oriented, honesty first" has always been the development concept of PROWALLS. So they will try their best to satisfy your requirement of a Indoor Fixed LED Screen.