Availability: | |
---|---|
Quantity: | |
Array zoom 25A
Prowalls
Moving Lights
Description
Array zoom 25A is a excellent Matrix Beam Wash 3-in-1 LED moving head light, versatile and powerful, 25x15W RGBW 4-in-1 high brightness, 4° - 60° extremely quiet zoom and continuous unlimited rotation movement on Pan and Tilt, Pixel animations, Letters, Numbers colorful and beautiful in-air dynamic effects.
Features
*Matrix Beam Wash 3-in-1
*25x15w Powerfull RGBW 4-in-1 Individual LEDs
*Excellent Optic Lens, high brightness
*All individual LED Pixel Control
*Pixel Mapping, Pixel animations, Letters, Numbers
*Fast and quiet 4° - 60° Zoom range
*Continuous rotation movement of Pan and Tilt
*0~100% smooth Dimming, Selectable Dimming curve effects
*Flicker free
*DMX, RDM (Remote Device Management), and Art-NET support
*3/5pin XLR, powerCON and RJ45 ethernet in/out connections
Description
Array zoom 25A is a excellent Matrix Beam Wash 3-in-1 LED moving head light, versatile and powerful, 25x15W RGBW 4-in-1 high brightness, 4° - 60° extremely quiet zoom and continuous unlimited rotation movement on Pan and Tilt, Pixel animations, Letters, Numbers colorful and beautiful in-air dynamic effects.
Features
*Matrix Beam Wash 3-in-1
*25x15w Powerfull RGBW 4-in-1 Individual LEDs
*Excellent Optic Lens, high brightness
*All individual LED Pixel Control
*Pixel Mapping, Pixel animations, Letters, Numbers
*Fast and quiet 4° - 60° Zoom range
*Continuous rotation movement of Pan and Tilt
*0~100% smooth Dimming, Selectable Dimming curve effects
*Flicker free
*DMX, RDM (Remote Device Management), and Art-NET support
*3/5pin XLR, powerCON and RJ45 ethernet in/out connections
Specification
SOURCE
25x15w Powerful RGBW 4-in-1 Individual LEDs
60,000 Hours LED Lifetime (May vary depending on different factors)
Over 16,000 lumens
FUNCTION
Matrix Beam Wash 3-in-1
Excellent Optic Lens, high brightness
All individual LED Pixel Control
Pixel Mapping, Pixel Animations, Letters, Numbers
Fast and quiet 4° -60° Zoom range, 3 Motors inside
Bright and sharpy Beam, awesome Wash
Colour rainbow effect with variable speed
0~100% smooth Dimming, Selectable Dimming curve effects
Variable speed Strobe
Continuous rotation movement of Pan and Tilt
Flicker free, fast and easy operation
CONTROL & CONNECTIONS
(3) DMX Channel Modes (23 / 88 / 113 channels)
(2) Art-NET mode : (75/100 channels)
RDM (Remote Device Management)
8 / 16 Bit Resolution Adjustable Movement
Full Color 180° Reversible LCD Menu Display
3-pin & 5-pin DMX In/Out
RJ45 Ethernet In/Out (Art-NET)
PowerCON Power In/Out
THERMAL & ELECTRICAL
484W max Power Consumption
Input voltage: 100-240V AC/50-60 Hz
-4℉ to 104℉(-20℃ to 40℃)
APPROVALS / RATINGS
CE | RoHs Compliant | IP20
SIZE / WEIGHT
19.3" (490mm) Length
15.1" (385mm) Width
23.5" (596mm) Height
37.5 lbs (17 kg) Weight
Specification
SOURCE
25x15w Powerful RGBW 4-in-1 Individual LEDs
60,000 Hours LED Lifetime (May vary depending on different factors)
Over 16,000 lumens
FUNCTION
Matrix Beam Wash 3-in-1
Excellent Optic Lens, high brightness
All individual LED Pixel Control
Pixel Mapping, Pixel Animations, Letters, Numbers
Fast and quiet 4° -60° Zoom range, 3 Motors inside
Bright and sharpy Beam, awesome Wash
Colour rainbow effect with variable speed
0~100% smooth Dimming, Selectable Dimming curve effects
Variable speed Strobe
Continuous rotation movement of Pan and Tilt
Flicker free, fast and easy operation
CONTROL & CONNECTIONS
(3) DMX Channel Modes (23 / 88 / 113 channels)
(2) Art-NET mode : (75/100 channels)
RDM (Remote Device Management)
8 / 16 Bit Resolution Adjustable Movement
Full Color 180° Reversible LCD Menu Display
3-pin & 5-pin DMX In/Out
RJ45 Ethernet In/Out (Art-NET)
PowerCON Power In/Out
THERMAL & ELECTRICAL
484W max Power Consumption
Input voltage: 100-240V AC/50-60 Hz
-4℉ to 104℉(-20℃ to 40℃)
APPROVALS / RATINGS
CE | RoHs Compliant | IP20
SIZE / WEIGHT
19.3" (490mm) Length
15.1" (385mm) Width
23.5" (596mm) Height
37.5 lbs (17 kg) Weight
Statement
The product has well capability and intact packing when leave factory. All of the user should comply with warning item and manual, any misuse cause of the damages are not included in our guarantee, and also can not be responsible for any malfunction & problem owing to ignore the manual.
Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using the unit.
Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
The unit is for indoor use only. Use only in a dry location.
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that no ventilation slots are blocked.
Disconnect main power before replacement or servicing.
Make sure there are no flammable materials close to the unit while operating as it is fire hazard.
Use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but always by taking its base.
Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the temperature is higher than this Unit surface temperature may reach up to 85℃. DO NOT touch the housing bare-hand during its operation. Turn off the power and allow about 15 minutes for the unit to cool down before replacing or serving.
In the event of serious operating problem, stop using the unit immediately.Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts.
DO NOT touch any wire during operation as high voltage might be causing electric shock.
Warning:
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.
DO NOT open the unit within five minutes after switching off.
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
Caution:
There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your nearest dealer.
Installation:
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. And make sure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of people and has no one pass by or under it.
Light Sources: 25x 4in1 RGBW LED
LENS Beam Angle: 6.5-60°
Power Consumption: 484W
Power Voltage: AC 100-240V, 50/60Hz
Dimension: 40*31*47CM
Net Weight: 14Kgs
Control
Control Modes: DMX512,Artnet control
DMX mode :13/ 24/88/113 Channels
Artnet mode : 75/100 channels
Pan/Tilt
Pan/Tilt: infinite rotation
Pan/Tilt Resolution: 8/16 bit
Construction
Display: 180°reversible LCD Display
Data In/Out socket: 3-pin & 5-pin XLR sockets
Powercon in
Protection Rating: IP20
Features
Dimmer:0~100% smooth dimming ; Two dimmers model in optional( delay or without delay)
Outstanding color macro effect
Fast,quiet operation and flicker free
Led temperature protection & Speed of fan run automatic based on the temperature of the head.
Single led control, zoom effect, Artnet control , infinite Pan and tilt rotation.
The DMX512 is widely used in intelligent lighting control,with a DMX 512 controller.connect several lights together,dmx in and dmx out,
3 pin XLR connectors: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)
Display:
MENU To select the programming functions
DOWN To go backward in the selected functions
uP To go forward in the selected functions
ENTER To confirm the selected functions
Set DMX Address Code
1 Press "Menu" to "Set DMX Address",and press"ENTER" keys to enter into
2 Show "Set DMX Address DMX Address:001",Press the "UP and DOWN"
keys to amended
3 Press "ENTER"keys to save and Exit,Press the"MENU"Keys does not save and Exit
4 . Press ‘left’ and ‘right’ to reverse the display
Menu
Address | Address001~XXX
| Set DMX Address | ||
Information
| Dmx Value | ALL… | Display DMX Value | |
LED Temperature | XXXC/F | |||
Fixture Hours | Current Hours Total Hours Last Hours | |||
Ethernet IP | X.X.X.X X.X.X.X | IP Address IP Mark | ||
Software Version | VX.X.X… | Software Version | ||
Option Config | Pan Tilt | Pan Reverse Tilt Reverse Pan-Degree Encoder Pan Tilt Speed | ON/OFF ON/OFF 540/360 ON/ OFF Speed 1~ 4 | |
Service
| Password | XXXX | Password Code=123 | |
RDM PID | 0-131071 | RDM PID | ||
IP Address | Manual Set Art-Net On IP2 Art-Net On IP10 | |||
IP Mask | X.X.X.X | IP Mask | ||
Universe | ·OFF,1-255 | Art Universe | ||
LED Address | 1-512 | LED Address | ||
Source Select | DMX Only Art-Net DMX&Art-Net | Signal Select DMX、Art、DMX and Art | ||
Display | Shutoff | 2-60m | ||
Reverse | ON/OFF | |||
Lock On | ON/OFF | |||
Temperature C/F | Celsius Fahrenheit | |||
Reset Default | ON/OFF | Reset To Factory Default | ||
Manual Control | Manual
| PAN …... White All | Password=XXX … White All =XXX | |
Test Channel | PAN … White All | |||
Calibration | Password PAN TILT ZOOM Rotation | Password=XXX PAN=XXX PAN=XXX ZOOM=XXX Rotation =XXX | ||
Reset | Reset ALL | Reset All Motors
| ||
DMX Mode Set
| Standard Shape RGB Shape RGBW DMX&Net RGB DMX&Net RGBW | Standard Mode Shape Mode With RGB Shape Mode With RGBW Shape Mode With RGB While DMX&Art-Net select Shape Mode With RGBW While DMX&Art-Net select |
1.When DMX mode is DMX&NetRGB or DMX&NetRGBW, DMX&Artnet under Option Config /Source select should be selected. LED1-LED25 (RGBW) control by Artnet, and the rest controlled by DMX.
2. When DMX Mode set is DMX&NET RGB or DMX&NET RGBW. DMX&Artnet under source select was choosed. LED R/G/B/W will be controlled by the Artnet.LED address means from which channel begin to control. LED address=10, means control Red of first LED from channel 10 , channel 11 control Green of first LED, channel 12 control control Blue of first LED,channel 12 control White of first LED, channel 14 control RED of second LED.
DMX channel´s functions and values (24/88/113DMX channels):
Mode/Channel | Value | Function | |||||
Standard | Shape RGB | Shape RGBW | DMX&Net RGB | DMX&Net RGBW | |||
1 | 1 | 1 | control by DMX | 1 | 1 | PAN Movement 8bit : | |
0-255 | Pan Movement | ||||||
2 | 2 | 2 | 2 | 2 | Pan Fine 16bit | ||
0-255 | Fine control of Pan movement | ||||||
3 | 3 | 3 | 3 | 3 | TILT Movement 8bit : | ||
0-255 | Tilt Movement | ||||||
4 | 4 | 4 | 4 | 4 | Tilt Fine 16bit | ||
0-255 | Fine control of Tilt movement | ||||||
5 | 5 | 5 | 5 | 5 | Speed Pan/Tilt movement: | ||
0-225 | max to min speed | ||||||
226-255 | no function | ||||||
6 | 6 | 6 | 6 | 6 | PAN Ritation : | ||
0-127 | No function | ||||||
128-189 | PAN Rotation Forward min to max speed | ||||||
190-193 | PAN Rotation Stop | ||||||
194-255 | PAN Rotation Reverse min to max speed | ||||||
7 | 7 | 7 | 7 | 7 | TILT Ritation : | ||
0-127 | No function | ||||||
128-189 | TILT Rotation Forward min to max speed | ||||||
190-193 | TILT Rotation Stop | ||||||
194-255 | TILT Rotation Reverse min to max speed | ||||||
8 | 8 | 8 | 10 | 10 | Zoom : | ||
0-255 | Zoom adjustment | ||||||
9 | 9 | 9 | 9 | 9 | STORBE | ||
0-31 | Led trun off | ||||||
32-63 | Led turn on | ||||||
64-95 | Strobe effect slow to fast | ||||||
96-127 | Led turn on | ||||||
128-159 | Pulse-effect in sequences | ||||||
160-191 | Led turn on | ||||||
192-223 | Random strobe effect slow to fast | ||||||
224-255 | Led turn on | ||||||
10 | 10 | 10 | 10 | 10 | Dimmer intensity: | ||
0-255 | Intensity 0 to 100% | ||||||
11 | 11 | 11 | 11 | 11 | Dimmer Mode: | ||
0-20 | Mode1 | ||||||
21-40 | Mode2 | ||||||
41-60 | Mode3 | ||||||
61-80 | Mode4 | ||||||
81-100 | Mode5 | ||||||
100-255 | Mode1 | ||||||
12 | 12 | 12 | 12 | 12 | LED Gamma: | ||
0-59 | Gamma 2.0 | ||||||
60-119 | Gamma 2.2 | ||||||
120-179 | Gamma 2.4 | ||||||
180-239 | Gamma 2.6 | ||||||
240-255 | Gamma 2.8 | ||||||
13 | Rainbow: | ||||||
0-7 | No function | ||||||
8-39 | RED to YELLOW | ||||||
40-71 | YELLOW to GREEN | ||||||
72-103 | GREEN to CYAN | ||||||
104-135 | CYAN to BLUE | ||||||
136-167 | BLUE to MAGENTA | ||||||
168-199 | MAGENTA to RED | ||||||
200-231 | RED to WHITE | ||||||
232-255 | Crossfading colours from slow to fast | ||||||
14 | Color Presets: | ||||||
0-4 | No function | ||||||
5--9 | White1 | ||||||
10--14 | White2 | ||||||
15-19 | White3 | ||||||
20-24 | White4 | ||||||
25-29 | White5 | ||||||
30-34 | White6 | ||||||
35-39 | Color1 | ||||||
40-44 | Color2 | ||||||
45-49 | Color3 | ||||||
50-54 | Color4 | ||||||
55-59 | Color5 | ||||||
60-64 | Color6 | ||||||
65-69 | Color7 | ||||||
70-74 | Color8 | ||||||
75-79 | Color9 | ||||||
80-84 | Color10 | ||||||
85-89 | Color11 | ||||||
90-94 | Color12 | ||||||
95-99 | Color13 | ||||||
100-104 | Color14 | ||||||
105-109 | Color15 | ||||||
110-114 | Color16 | ||||||
115-119 | Color17 | ||||||
120-124 | Color18 | ||||||
125-129 | Color19 | ||||||
130-134 | Color20 | ||||||
135-139 | Color21 | ||||||
140-144 | Color22 | ||||||
145-149 | Color23 | ||||||
150-154 | Color24 | ||||||
155-159 | Color25 | ||||||
160-164 | Color26 | ||||||
165-169 | Color27 | ||||||
170-255 | Reserved | ||||||
15 | Color Presets Dimmer: | ||||||
0-255 | Dimmer 100 to 0% | ||||||
16 | Chase Patterns: | ||||||
0-5 | No function | ||||||
6-10 | Number'0' | ||||||
11-15 | Number'1' | ||||||
16-20 | Number'2' | ||||||
21-25 | Number'3' | ||||||
26-30 | Number'4' | ||||||
31-35 | Number'5' | ||||||
36-40 | Number'6' | ||||||
41-45 | Number'7' | ||||||
46-50 | Number'8' | ||||||
51-55 | Number'9' | ||||||
56-60 | A | ||||||
61-65 | B | ||||||
66-70 | C | ||||||
71-75 | D | ||||||
76-80 | E | ||||||
81-85 | F | ||||||
85-90 | G | ||||||
91-95 | H | ||||||
96-100 | I | ||||||
101-105 | J | ||||||
106-110 | K | ||||||
111-115 | L | ||||||
116-120 | M | ||||||
121-125 | N | ||||||
126-130 | O | ||||||
131-135 | P | ||||||
136-140 | Q | ||||||
141-145 | R | ||||||
146-150 | S | ||||||
151-155 | T | ||||||
155-160 | U | ||||||
161-165 | V | ||||||
166-170 | W | ||||||
171-175 | X | ||||||
176-180 | Y | ||||||
181-185 | Z | ||||||
186-190 | 0'-'9' | ||||||
191-195 | A'-'Z' | ||||||
196-200 | 0'-'Z' | ||||||
201-205 | Patter function1 | ||||||
206-210 | Patter function2 | ||||||
211-215 | Patter function3 | ||||||
216-220 | Patter function4 | ||||||
221-225 | Patter function5 | ||||||
226-230 | Patter function6 | ||||||
231-235 | Patter function7 | ||||||
236-240 | Patter function8 | ||||||
241-245 | Patter function9 | ||||||
246-250 | Patter function10 | ||||||
251-255 | Patter function11 | ||||||
17 | Chase Patterns Direction: | ||||||
0-49 | ↑Chase Up | ||||||
50-99 | ←Chase Left | ||||||
100-149 | ↓Chase Down | ||||||
150-255 | →Chase Right | ||||||
18 | Chase Speed: | ||||||
0-125 | Fast to Slow Backward | ||||||
126-130 | Stop(Speed=0) | ||||||
131-255 | Slow to Fast Forward | ||||||
19 | Chase Fade: | ||||||
0-255 | Fade Chase | ||||||
20 | Red LED -all arrays : | ||||||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
21 | Green LED-all arrays : | ||||||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
22 | Blue LED -all arrays : | ||||||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
23 | White LED -all arrays : | ||||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
24 | 13 | 13 | 13 | 13 | Lamp on/off, reset, internal programs: | ||
0-79 | Normal | ||||||
80-99 | All motor reset | ||||||
100-255 | Normal | ||||||
14 | 14 | control by ART_NET | 1 | 1 | Red LED -array 1 : | ||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
15 | 15 | 2 | 2 | Green LED-array 1 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
16 | 16 | 3 | 3 | Blue LED -array 1 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
17 | 4 | White LED -array 1 : | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
17 | 18 | 4 | 5 | Red LED -array 2 : | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
18 | 19 | 5 | 6 | Green LED-array 2 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
19 | 20 | 6 | 7 | Blue LED -array 2 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
21 | 8 | White LED -array 2 : | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
20 | 22 | 7 | 9 | Red LED -array 3 : | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
21 | 23 | 8 | 10 | Green LED-array 3 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
22 | 24 | 9 | 11 | Blue LED -array 3 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
25 | 12 | White LED -array 3: | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
23 | 26 | 10 | 13 | Red LED -array 4 : | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
24 | 27 | 11 | 14 | Green LED-array 4 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
25 | 28 | 12 | 15 | Blue LED -array 4 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
29 | 16 | White LED -array 4 : | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
26 | 30 | 13 | 17 | Red LED -array 5 : | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
27 | 31 | 14 | 18 | Green LED-array 5 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
28 | 32 | 15 | 19 | Blue LED -array 5 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
33 | 20 | White LED -array 5 : | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
29 | 34 | 16 | 21 | Red LED -array 6 : | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
30 | 35 | 17 | 22 | Green LED-array 6 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
31 | 36 | 18 | 23 | Blue LED -array 6 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
37 | 24 | White LED -array 6: | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
32 | 38 | 19 | 25 | Red LED -array 7 : | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
33 | 39 | 20 | 26 | Green LED-array 7 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
34 | 40 | 21 | 27 | Blue LED -array 7 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
41 | 28 | White LED -array 7: | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
86 | 110 | 73 | 97 | Red LED -array 25: | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
87 | 111 | 74 | 98 | Green LED-array 25 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
88 | 112 | 75 | 99 | Blue LED -array 25 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
113 | 100 | White LED -array 25: | |||||
0-255 | White ( 0-Black , 255-100% White ) |
When channel mode is DMX&ARTNET RGB or DMX&ARTNET RGBW. The yellow parts are (RGBW of LED1-LED25) channels controlled by Artnet, rest channels controlled by DMX.
4.How to control Unit with ArtNet
1. Setting IP Address, choose Manual set to manual input IP address, better choose ON IP2 or ON IP10 auto set.
2. IP Mask , input 255.0.0.0
3. Universe choose OFF or 1
4. Source select , input signal selection, there are three options:
DMX only → input signal is DMX
Art-Net → input Art-Net signal
DMX & Art-Net → Simultaneous input DMX & Art-Net signal
Notice:
l If Select DMX only or Art-Net, Channels mode only can choose Standard or Shape RGB or Shape RGBW. Then only have DMX or Art-Net signal separately control Pan/Tilt, Dimmer and RGBW, etc.
l If select DMX & ArtNet , means simultaneously controlled by DMX and Art-Net, and Art-Net only control RGBW Channels, DMX control others channels, meantime, CH MODE only can choose DMX & Artnet RGB or DMX & Net RGBW.
For example,if now choose DMX & Artnet RGB CH Mode, then CH 1 - CH13 are controlled by DMX, RGB matrix controlled by Art-Net.
↓ ↓
→
→
5. When fixtures signal input select Art-Net or DMX & Art-Net, means selected Art-Net controller to control fixtures. But Art-Net controller also need set the same IP address, IP MARK as fixtures.
Setting via menu
Information → Ethernet IP → select search fixture’s IP Address, IP MARK information.
Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting:
A. The unit does not work, no light and the fan does not work
1. Check the connection of power and main fuse.
2. Measure the mains voltage on the main connector.
3. Check the power on LED.
B. Not responding to DMX controller
1. DMX LED should be on. If not, check DMX connectors, cables to see if link properly.
2. If the DMX LED is on and no response to the channel, check the address settings and DMX polarity.
3. If you have intermittent DMX signal problems, check the pins on connectors or on
PCB of the unit or the previous one.
4. Try to use another DMX controller.
5. Check if the DMX cables run near or run alongside to high voltage cables that may cause damage or interference to DMX interface circuit.
C. One of the channels is not working well
1. The stepper motor might be damaged or the cable connected to the PCB is broken.
2. The motor’s drive IC on the PCB might be out of condition.
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.
Ÿ Clean with soft cloth using normal glass cleaning fluid.
Ÿ Always dry the parts carefully.
Ÿ Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
Statement
The product has well capability and intact packing when leave factory. All of the user should comply with warning item and manual, any misuse cause of the damages are not included in our guarantee, and also can not be responsible for any malfunction & problem owing to ignore the manual.
Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using the unit.
Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
The unit is for indoor use only. Use only in a dry location.
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that no ventilation slots are blocked.
Disconnect main power before replacement or servicing.
Make sure there are no flammable materials close to the unit while operating as it is fire hazard.
Use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but always by taking its base.
Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the temperature is higher than this Unit surface temperature may reach up to 85℃. DO NOT touch the housing bare-hand during its operation. Turn off the power and allow about 15 minutes for the unit to cool down before replacing or serving.
In the event of serious operating problem, stop using the unit immediately.Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts.
DO NOT touch any wire during operation as high voltage might be causing electric shock.
Warning:
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.
DO NOT open the unit within five minutes after switching off.
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
Caution:
There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your nearest dealer.
Installation:
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. And make sure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of people and has no one pass by or under it.
Light Sources: 25x 4in1 RGBW LED
LENS Beam Angle: 6.5-60°
Power Consumption: 484W
Power Voltage: AC 100-240V, 50/60Hz
Dimension: 40*31*47CM
Net Weight: 14Kgs
Control
Control Modes: DMX512,Artnet control
DMX mode :13/ 24/88/113 Channels
Artnet mode : 75/100 channels
Pan/Tilt
Pan/Tilt: infinite rotation
Pan/Tilt Resolution: 8/16 bit
Construction
Display: 180°reversible LCD Display
Data In/Out socket: 3-pin & 5-pin XLR sockets
Powercon in
Protection Rating: IP20
Features
Dimmer:0~100% smooth dimming ; Two dimmers model in optional( delay or without delay)
Outstanding color macro effect
Fast,quiet operation and flicker free
Led temperature protection & Speed of fan run automatic based on the temperature of the head.
Single led control, zoom effect, Artnet control , infinite Pan and tilt rotation.
The DMX512 is widely used in intelligent lighting control,with a DMX 512 controller.connect several lights together,dmx in and dmx out,
3 pin XLR connectors: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)
Display:
MENU To select the programming functions
DOWN To go backward in the selected functions
uP To go forward in the selected functions
ENTER To confirm the selected functions
Set DMX Address Code
1 Press "Menu" to "Set DMX Address",and press"ENTER" keys to enter into
2 Show "Set DMX Address DMX Address:001",Press the "UP and DOWN"
keys to amended
3 Press "ENTER"keys to save and Exit,Press the"MENU"Keys does not save and Exit
4 . Press ‘left’ and ‘right’ to reverse the display
Menu
Address | Address001~XXX
| Set DMX Address | ||
Information
| Dmx Value | ALL… | Display DMX Value | |
LED Temperature | XXXC/F | |||
Fixture Hours | Current Hours Total Hours Last Hours | |||
Ethernet IP | X.X.X.X X.X.X.X | IP Address IP Mark | ||
Software Version | VX.X.X… | Software Version | ||
Option Config | Pan Tilt | Pan Reverse Tilt Reverse Pan-Degree Encoder Pan Tilt Speed | ON/OFF ON/OFF 540/360 ON/ OFF Speed 1~ 4 | |
Service
| Password | XXXX | Password Code=123 | |
RDM PID | 0-131071 | RDM PID | ||
IP Address | Manual Set Art-Net On IP2 Art-Net On IP10 | |||
IP Mask | X.X.X.X | IP Mask | ||
Universe | ·OFF,1-255 | Art Universe | ||
LED Address | 1-512 | LED Address | ||
Source Select | DMX Only Art-Net DMX&Art-Net | Signal Select DMX、Art、DMX and Art | ||
Display | Shutoff | 2-60m | ||
Reverse | ON/OFF | |||
Lock On | ON/OFF | |||
Temperature C/F | Celsius Fahrenheit | |||
Reset Default | ON/OFF | Reset To Factory Default | ||
Manual Control | Manual
| PAN …... White All | Password=XXX … White All =XXX | |
Test Channel | PAN … White All | |||
Calibration | Password PAN TILT ZOOM Rotation | Password=XXX PAN=XXX PAN=XXX ZOOM=XXX Rotation =XXX | ||
Reset | Reset ALL | Reset All Motors
| ||
DMX Mode Set
| Standard Shape RGB Shape RGBW DMX&Net RGB DMX&Net RGBW | Standard Mode Shape Mode With RGB Shape Mode With RGBW Shape Mode With RGB While DMX&Art-Net select Shape Mode With RGBW While DMX&Art-Net select |
1.When DMX mode is DMX&NetRGB or DMX&NetRGBW, DMX&Artnet under Option Config /Source select should be selected. LED1-LED25 (RGBW) control by Artnet, and the rest controlled by DMX.
2. When DMX Mode set is DMX&NET RGB or DMX&NET RGBW. DMX&Artnet under source select was choosed. LED R/G/B/W will be controlled by the Artnet.LED address means from which channel begin to control. LED address=10, means control Red of first LED from channel 10 , channel 11 control Green of first LED, channel 12 control control Blue of first LED,channel 12 control White of first LED, channel 14 control RED of second LED.
DMX channel´s functions and values (24/88/113DMX channels):
Mode/Channel | Value | Function | |||||
Standard | Shape RGB | Shape RGBW | DMX&Net RGB | DMX&Net RGBW | |||
1 | 1 | 1 | control by DMX | 1 | 1 | PAN Movement 8bit : | |
0-255 | Pan Movement | ||||||
2 | 2 | 2 | 2 | 2 | Pan Fine 16bit | ||
0-255 | Fine control of Pan movement | ||||||
3 | 3 | 3 | 3 | 3 | TILT Movement 8bit : | ||
0-255 | Tilt Movement | ||||||
4 | 4 | 4 | 4 | 4 | Tilt Fine 16bit | ||
0-255 | Fine control of Tilt movement | ||||||
5 | 5 | 5 | 5 | 5 | Speed Pan/Tilt movement: | ||
0-225 | max to min speed | ||||||
226-255 | no function | ||||||
6 | 6 | 6 | 6 | 6 | PAN Ritation : | ||
0-127 | No function | ||||||
128-189 | PAN Rotation Forward min to max speed | ||||||
190-193 | PAN Rotation Stop | ||||||
194-255 | PAN Rotation Reverse min to max speed | ||||||
7 | 7 | 7 | 7 | 7 | TILT Ritation : | ||
0-127 | No function | ||||||
128-189 | TILT Rotation Forward min to max speed | ||||||
190-193 | TILT Rotation Stop | ||||||
194-255 | TILT Rotation Reverse min to max speed | ||||||
8 | 8 | 8 | 10 | 10 | Zoom : | ||
0-255 | Zoom adjustment | ||||||
9 | 9 | 9 | 9 | 9 | STORBE | ||
0-31 | Led trun off | ||||||
32-63 | Led turn on | ||||||
64-95 | Strobe effect slow to fast | ||||||
96-127 | Led turn on | ||||||
128-159 | Pulse-effect in sequences | ||||||
160-191 | Led turn on | ||||||
192-223 | Random strobe effect slow to fast | ||||||
224-255 | Led turn on | ||||||
10 | 10 | 10 | 10 | 10 | Dimmer intensity: | ||
0-255 | Intensity 0 to 100% | ||||||
11 | 11 | 11 | 11 | 11 | Dimmer Mode: | ||
0-20 | Mode1 | ||||||
21-40 | Mode2 | ||||||
41-60 | Mode3 | ||||||
61-80 | Mode4 | ||||||
81-100 | Mode5 | ||||||
100-255 | Mode1 | ||||||
12 | 12 | 12 | 12 | 12 | LED Gamma: | ||
0-59 | Gamma 2.0 | ||||||
60-119 | Gamma 2.2 | ||||||
120-179 | Gamma 2.4 | ||||||
180-239 | Gamma 2.6 | ||||||
240-255 | Gamma 2.8 | ||||||
13 | Rainbow: | ||||||
0-7 | No function | ||||||
8-39 | RED to YELLOW | ||||||
40-71 | YELLOW to GREEN | ||||||
72-103 | GREEN to CYAN | ||||||
104-135 | CYAN to BLUE | ||||||
136-167 | BLUE to MAGENTA | ||||||
168-199 | MAGENTA to RED | ||||||
200-231 | RED to WHITE | ||||||
232-255 | Crossfading colours from slow to fast | ||||||
14 | Color Presets: | ||||||
0-4 | No function | ||||||
5--9 | White1 | ||||||
10--14 | White2 | ||||||
15-19 | White3 | ||||||
20-24 | White4 | ||||||
25-29 | White5 | ||||||
30-34 | White6 | ||||||
35-39 | Color1 | ||||||
40-44 | Color2 | ||||||
45-49 | Color3 | ||||||
50-54 | Color4 | ||||||
55-59 | Color5 | ||||||
60-64 | Color6 | ||||||
65-69 | Color7 | ||||||
70-74 | Color8 | ||||||
75-79 | Color9 | ||||||
80-84 | Color10 | ||||||
85-89 | Color11 | ||||||
90-94 | Color12 | ||||||
95-99 | Color13 | ||||||
100-104 | Color14 | ||||||
105-109 | Color15 | ||||||
110-114 | Color16 | ||||||
115-119 | Color17 | ||||||
120-124 | Color18 | ||||||
125-129 | Color19 | ||||||
130-134 | Color20 | ||||||
135-139 | Color21 | ||||||
140-144 | Color22 | ||||||
145-149 | Color23 | ||||||
150-154 | Color24 | ||||||
155-159 | Color25 | ||||||
160-164 | Color26 | ||||||
165-169 | Color27 | ||||||
170-255 | Reserved | ||||||
15 | Color Presets Dimmer: | ||||||
0-255 | Dimmer 100 to 0% | ||||||
16 | Chase Patterns: | ||||||
0-5 | No function | ||||||
6-10 | Number'0' | ||||||
11-15 | Number'1' | ||||||
16-20 | Number'2' | ||||||
21-25 | Number'3' | ||||||
26-30 | Number'4' | ||||||
31-35 | Number'5' | ||||||
36-40 | Number'6' | ||||||
41-45 | Number'7' | ||||||
46-50 | Number'8' | ||||||
51-55 | Number'9' | ||||||
56-60 | A | ||||||
61-65 | B | ||||||
66-70 | C | ||||||
71-75 | D | ||||||
76-80 | E | ||||||
81-85 | F | ||||||
85-90 | G | ||||||
91-95 | H | ||||||
96-100 | I | ||||||
101-105 | J | ||||||
106-110 | K | ||||||
111-115 | L | ||||||
116-120 | M | ||||||
121-125 | N | ||||||
126-130 | O | ||||||
131-135 | P | ||||||
136-140 | Q | ||||||
141-145 | R | ||||||
146-150 | S | ||||||
151-155 | T | ||||||
155-160 | U | ||||||
161-165 | V | ||||||
166-170 | W | ||||||
171-175 | X | ||||||
176-180 | Y | ||||||
181-185 | Z | ||||||
186-190 | 0'-'9' | ||||||
191-195 | A'-'Z' | ||||||
196-200 | 0'-'Z' | ||||||
201-205 | Patter function1 | ||||||
206-210 | Patter function2 | ||||||
211-215 | Patter function3 | ||||||
216-220 | Patter function4 | ||||||
221-225 | Patter function5 | ||||||
226-230 | Patter function6 | ||||||
231-235 | Patter function7 | ||||||
236-240 | Patter function8 | ||||||
241-245 | Patter function9 | ||||||
246-250 | Patter function10 | ||||||
251-255 | Patter function11 | ||||||
17 | Chase Patterns Direction: | ||||||
0-49 | ↑Chase Up | ||||||
50-99 | ←Chase Left | ||||||
100-149 | ↓Chase Down | ||||||
150-255 | →Chase Right | ||||||
18 | Chase Speed: | ||||||
0-125 | Fast to Slow Backward | ||||||
126-130 | Stop(Speed=0) | ||||||
131-255 | Slow to Fast Forward | ||||||
19 | Chase Fade: | ||||||
0-255 | Fade Chase | ||||||
20 | Red LED -all arrays : | ||||||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
21 | Green LED-all arrays : | ||||||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
22 | Blue LED -all arrays : | ||||||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
23 | White LED -all arrays : | ||||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
24 | 13 | 13 | 13 | 13 | Lamp on/off, reset, internal programs: | ||
0-79 | Normal | ||||||
80-99 | All motor reset | ||||||
100-255 | Normal | ||||||
14 | 14 | control by ART_NET | 1 | 1 | Red LED -array 1 : | ||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
15 | 15 | 2 | 2 | Green LED-array 1 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
16 | 16 | 3 | 3 | Blue LED -array 1 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
17 | 4 | White LED -array 1 : | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
17 | 18 | 4 | 5 | Red LED -array 2 : | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
18 | 19 | 5 | 6 | Green LED-array 2 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
19 | 20 | 6 | 7 | Blue LED -array 2 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
21 | 8 | White LED -array 2 : | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
20 | 22 | 7 | 9 | Red LED -array 3 : | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
21 | 23 | 8 | 10 | Green LED-array 3 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
22 | 24 | 9 | 11 | Blue LED -array 3 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
25 | 12 | White LED -array 3: | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
23 | 26 | 10 | 13 | Red LED -array 4 : | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
24 | 27 | 11 | 14 | Green LED-array 4 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
25 | 28 | 12 | 15 | Blue LED -array 4 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
29 | 16 | White LED -array 4 : | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
26 | 30 | 13 | 17 | Red LED -array 5 : | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
27 | 31 | 14 | 18 | Green LED-array 5 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
28 | 32 | 15 | 19 | Blue LED -array 5 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
33 | 20 | White LED -array 5 : | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
29 | 34 | 16 | 21 | Red LED -array 6 : | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
30 | 35 | 17 | 22 | Green LED-array 6 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
31 | 36 | 18 | 23 | Blue LED -array 6 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
37 | 24 | White LED -array 6: | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
32 | 38 | 19 | 25 | Red LED -array 7 : | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
33 | 39 | 20 | 26 | Green LED-array 7 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
34 | 40 | 21 | 27 | Blue LED -array 7 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
41 | 28 | White LED -array 7: | |||||
0-255 | White ( 0-Black , 255-100% White ) | ||||||
86 | 110 | 73 | 97 | Red LED -array 25: | |||
0-255 | Red ( 0-Black , 255-100% Red ) | ||||||
87 | 111 | 74 | 98 | Green LED-array 25 : | |||
0-255 | Green ( 0-Black , 255-100% Green ) | ||||||
88 | 112 | 75 | 99 | Blue LED -array 25 : | |||
0-255 | Blue ( 0-Black , 255-100% Blue ) | ||||||
113 | 100 | White LED -array 25: | |||||
0-255 | White ( 0-Black , 255-100% White ) |
When channel mode is DMX&ARTNET RGB or DMX&ARTNET RGBW. The yellow parts are (RGBW of LED1-LED25) channels controlled by Artnet, rest channels controlled by DMX.
4.How to control Unit with ArtNet
1. Setting IP Address, choose Manual set to manual input IP address, better choose ON IP2 or ON IP10 auto set.
2. IP Mask , input 255.0.0.0
3. Universe choose OFF or 1
4. Source select , input signal selection, there are three options:
DMX only → input signal is DMX
Art-Net → input Art-Net signal
DMX & Art-Net → Simultaneous input DMX & Art-Net signal
Notice:
l If Select DMX only or Art-Net, Channels mode only can choose Standard or Shape RGB or Shape RGBW. Then only have DMX or Art-Net signal separately control Pan/Tilt, Dimmer and RGBW, etc.
l If select DMX & ArtNet , means simultaneously controlled by DMX and Art-Net, and Art-Net only control RGBW Channels, DMX control others channels, meantime, CH MODE only can choose DMX & Artnet RGB or DMX & Net RGBW.
For example,if now choose DMX & Artnet RGB CH Mode, then CH 1 - CH13 are controlled by DMX, RGB matrix controlled by Art-Net.
↓ ↓
→
→
5. When fixtures signal input select Art-Net or DMX & Art-Net, means selected Art-Net controller to control fixtures. But Art-Net controller also need set the same IP address, IP MARK as fixtures.
Setting via menu
Information → Ethernet IP → select search fixture’s IP Address, IP MARK information.
Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting:
A. The unit does not work, no light and the fan does not work
1. Check the connection of power and main fuse.
2. Measure the mains voltage on the main connector.
3. Check the power on LED.
B. Not responding to DMX controller
1. DMX LED should be on. If not, check DMX connectors, cables to see if link properly.
2. If the DMX LED is on and no response to the channel, check the address settings and DMX polarity.
3. If you have intermittent DMX signal problems, check the pins on connectors or on
PCB of the unit or the previous one.
4. Try to use another DMX controller.
5. Check if the DMX cables run near or run alongside to high voltage cables that may cause damage or interference to DMX interface circuit.
C. One of the channels is not working well
1. The stepper motor might be damaged or the cable connected to the PCB is broken.
2. The motor’s drive IC on the PCB might be out of condition.
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.
Ÿ Clean with soft cloth using normal glass cleaning fluid.
Ÿ Always dry the parts carefully.
Ÿ Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.