Specification

SOURCE

Philips 132W Platinum 2R lamp (Optional Yodn 2R)

6,000 Hour Average Life (May vary depending on different factors)

FUNCTION

Moonflower effect, barrel mirrored scanner

Philips 132W Platinum 2R lamp (Optional Yodn 2R)

180° pan / 360° tilt continuous barrel rotation, Reflector Rotation Mirror produces a 360-degree rotation

16 Static Gobos + Spot & Gobo Shake, 18 Colors + white w/ Split Colors, 6 built-in programs

Independent gobo and color wheels, Gobo scroll mode

100 degree Beam angle

0% - 100% Linear Dimmer

Strobe & Pulse effect; random strobe slow to fast

Fan Cooled

Stepper motors with micro stepping

CONTROL & CONNECTIONS

(3)DMX Channel Modes (8/ 12/18)

LCD Display

3pin DMX In/Out

powerCON Power In/Out

6 Built-in Programs

DMX control, Show Mode, Sound Active

THERMAL & ELECTRICAL

202W max Power Consumption

Input voltage: 100-240V AC/50-60 Hz

APPROVALS / RATINGS

CE | RoHs Compliant | IP20

SIZE / WEIGHT

Length: 20.2” (512mm)

Width: 20.3” (515mm)

Height: 14” (355mm)

Weight: 22 lbs. (10 kg)

Resources Download

Fixture Libraries

DMX Traits

User Manual

Catalog

Statement

The  product  has  well  capability  and  intact  packing  when  leave  factory. All  of  the  user should comply with warning item and manual, any misuse cause of the damages are not  included  in  our  guarantee,  and  also  can  not  be  responsible  for  any  malfunction  & problem owing to ignore the manual.

Warning:

y To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.

y DO NOT open the unit within five minutes after switching off.

y The  housing,  the  lenses,  or  the  ultraviolet  filter  must  be  replaced  if  they  are  visibly damaged.

Caution:

There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your nearest dealer.

Installation:

The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is  firmly  fixed  to  avoid  vibration  and  slipping  while  operating.  And  make  sure  that  the structure to which you are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.

The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of people.

5. Trouble shooting  

Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting:

A. The unit does not work, no light and the fan does not work

1. Check the connection of power and main fuse.

2. Measure the mains voltage on the main connector.

3. Check the power on LED.

B. Not responding to DMX controller

1. DMX LED should be on. If not, check DMX connectors, cables to see if link properly.

2. If the DMX LED is on and no response to the channel, check the address settings and DMX polarity.

3. If you have intermittent DMX signal problems, check the pins on connectors or on

PCB of the unit or the previous one.

4. Try to use another DMX controller.

5. Check if the DMX cables run near or run alongside to high voltage cables that may cause damage or interference to DMX interface circuit.