IP65 54x3W uplight DJ led Outdoor par light

Specification

SOURCE

IP Rated 54x3W Edison LEDs, standard RGB(18red, 18green, 18blue), optional RGBW(14red, 14green, 14blue, 12white), Customizable

60,000 Hours LED Lifetime (May vary depending on different factors)

FUNCTION

25° Beam angles (optional 15°, 45°)

Excellent Color Mixing

Flicker Free Operation for TV and FILM

Electronic Strobe and Variable Dim Curves

Built-in Marcos effect, Built-in automated programs

Manual adjustment

CONTROL & CONNECTIONS

(1) DMX Channel Modes (8 channels)

LCD Menu Display

DMX In/Out

Power In/Out

DMX512, Auto run, Sound, Master/Slave

THERMAL & ELECTRICAL

200W max Power Consumption

Input voltage: 100-240V AC/50-60 Hz

APPROVALS / RATINGS

CE | RoHs Compliant | IP65

SIZE / WEIGHT

11.8" (300mm) Length

9.8" (250mm) Width

9.8" (250mm) Height

22 lbs (10 kg) Weight

U N D E R S T A N D I N G D M X

DMX-512

DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and

controller manufactures as a form of communication between intelligent fixtures

and controllers. DMX allows all makes and models of different manufactures to be

linked together and operate from a single controller. This is possible as long as all the

fixtures and the controller are DMX compliant. A DMX controller sends the DMX data

instructions to the fixture allowing the user to control the different aspects of an

intelligent light. DMX data is sent out as serial data that travels from fixture to fixture

via data “IN” and data “OUT” XLR terminals located on the fixtures (most controllers

will only have output jacks).

DMX LINKING

To ensure proper DMX data transmission, always use proper DMX cables and a

terminator. When using several DMX fixtures try to use the shortest cable path

possible. Never split a DMX line with a “Y” style connector. The order in which the

fixtures are connected in a DMX line does not influence the DMX addressing. For

example; a fixture assigned a starting DMX address of 1 may be placed anywhere in

the DMX chain, at the beginning, at the end, or anywhere in the middle. The DMX

controller knows to send data assigned to address 1 to that fixture no matter where

it is located in the DMX chain. The IP65 Classic Par 543 can be controlled via DMX-512

protocol and the DMX address is set via the control menu.

DATA CABLE (DMX Cable) REQUIREMENTS (For DMX and Primary/Secondary Operation)

Your fixture and your DMX controller require a standard 3pin or 5pin XLR connector

for data input and data output . Also, remember that a DMX line

must be daisy chained and cannot be split.

DMX-512 CONTROLLER CONNECTION

Connect the provided XLR cable to the female XLR output of your controller and the other side to the male XLR input of the IP65 Classic Par 543. The diagram below illustrates a typical DMX-512 connection when the fixture is in the 8 Channel Mode. You can chain multiple panels together through serial linking. . Always be sure daisy chain your In and out data connections, never split or “Y” your DMX connections.