Description
Outdoor Hybrid BWS380 is a powerful yet compact IP65-rated LED fixture offering outstanding BWS (Beam Wash Spot) qualities in any environment.
It is the ideal fixture for any outdoor or indoor application requiring superior output, bright and powerful Beams Wash Spot 3in1, and quiet operation, as well as stunningly precise gobos and colors. Outdoor Hybrid BWS380 provides the designer a comprehensive FX package with 14 colors and 12 fixed gobos & 9 rotating gobos, overlapping dual prisms, frost and 0-100% smooth dimming. Its indexable framing system provides full blackout shutter cuts for precise beam shape control.
Features
*IP65 rated waterproof Outdoor BWS moving head Light
*Osram R18 380W lamp
*2-45° Angle, sharpy Beam and wide Zoom
*Advanced Optical system and Cooling System
*Two Gobos wheels: fixed gobo wheel and rotating gobo wheel
*Rainbow effect
Specification
SOURCE
Osram R18 380W lamp
580,000 lux @ 10m
2,000 Hours lamp Lifetime (May vary depending on different factors)
FUNCTION
2-45° Angle, Super Bright Beam and wide Zoom
8-facet Circular rotating prism, can be rotated in two directions with variable speed
Independent Frost filter
13 colors + white, half-color effect, linear color change and two-way variable speed rotation rainbow effect
Two Gobo wheels:
12 fixed Gobo+open, two directions shaking, animation, water effects
9 rotating glass gobo wheel
0-100% Linear Dimming
Advanced Optical system and Cooling System
Motorized Focus
Three-phase motors
High Speed Mechanical Shutter and Strobe
Precise movement, 540° Pan, 270° Tilit
CONTROL & CONNECTIONS
(1) DMX Channel Modes (18 channels)
Intelligent LCD Display
IP65 3pin DMX In/Out
IP65 powerCON Power In
DMX512, Auto run, Sound, Master/Slave
THERMAL & ELECTRICAL
700W max Power Consumption
Input voltage: 100-240V AC/50-60 Hz
APPROVALS / RATINGS
CE | RoHs Compliant | IP65
Light SIZE / WEIGHT
20.1" (510mm) Length
17.3" (440mm) Width
26.8" (680mm) Height
61.7 lbs (28 kg) net Weight
There are professional parts like mainboard, power supply in lights. Non-professionals mustn’t disassemble item and parts without authorization.
Possible reason：lamps don't cool down; lamps is out of life. Solution is as following:
l The lamp doesn’t cool down because of improper operation. The lamp need 10 minutes to be cooling, and then you can restart it after this；
l Check if the lamp is out of life or not, change new lamp；
l Check the if there is electric leakage, off and poor contact between lamp and ignitor ；
l Change new ignitor.
Possible reason：service time of lamp is long or light patch is not clean, the solution is as following：
l Check if the lamp is out of life or not, change new lamp；
l Check if the optical part and lamp is clean or not. Please clean the lamp and other parts regularly.
l Check if the channel value of focus is suitable the current projection distance or not.
Possible reason：The internal wiring is in protection state. The solution is as following:
l Check if the fan works or is dirty；
l Check the switch of temperature control is on or off；
l Check if the lamp is out of life or not, change new lamp
Possible reason：problem signal line or the value of channel is wrong, the solution is as following:
l Check the initial address code and connection state of DMX signal line( the signal line is good or not, the XLR is loose or not)；
l Add signal amplifier, and 120 ohm terminal resistance；
Possible reason：power circuit is poor，solution is as following：
l Check if the fuse is broken or not, change new fuse；
l Check if there is the poor connection because of long transportation;
l Check the input power supply, mainboard and other parts.
l Check if the local power is suitable for the rated voltage or not, leakage protector and over-current protector is suitable for the electrical load or not ；
l Don’t use the power line with damaged insulating layer, don’t connect the power line with other guide wire；
l Please clean the fans and parts every month. Otherwise the bad cooling system will cause some problem;
l In installation, the fixed screw must be fastening and there is must with safety rope with regular check；
l Easily flammable materials, e.g. decoration material and other surfaces and objects, must maintain a minimum distance of 3m to the housing! walls must maintain a minimum distance of 50cm to the housing! The device must be installed on a fireproof surface only (no carpet)! Always ensure a proper circulation of air;
l The continuous working hours should not be more than 10 hour and the interval time should be more than 10 minutes before restarting, otherwise the lamp will not be on because of over temperature protection;
l If you want the shutter for a long time, please use controller to close lamp;
l In order to make many lights follow scene effect, the light shouldn’t stay in unfinished scene for more than 3 minutes, then many lights can work on same step.
l Please stop it if there is abnormal during usage.