Description
Prowalls 20R Torch is Hybrid Beam Spot Wash 3-in-1 moving head light, super powerful and bright but compact, from the sharp parallel Beam to a wide zoom to produce varying beam and optimal wash effects, perfect full CMY color mixing effects, two Prism, 3D effects
Features
*Hybrid Beam Spot Wash 3-in-1, 3D effect
*440W high-power R20 YODN Lamp (optional OSRAM SIRIUS HRI 20R 440W Lamp)
*Super bright sharp parallel Beam
*Full CMY color mixing system
*Two rotating Prism (16-facet and 6-facet linear independent rotating prisms)
*2°-40° Linear Zoom, Linear Frost, Focus and Dimming
*High speed shutter and strobe
*15 dichroic colors+Open, 17 fixed gobos+open, 9 Interchangeable / Rotating gobos
Specification
SOURCE
440W high-power R20 YODN Lamp (optional OSRAM SIRIUS HRI 20R 440W Lamp)
7000K Color Temperature
2,000 Hours LED Lifetime (May vary depending on different factors)
FUNCTION
Hybrid Beam Spot Wash 3-in-1
2°-40° Beam Angle
2°-40° Linear Zoom, Wash Filter
Three level varying Beam splitting, super bright sharp parallel Beam
Smooth full CMY color mixing system
Perfect optical system
15 dichroic colors+Open
17 fixed metal gobos+open
9 glass Interchangeable / Rotating gobos+open (Rotating in both directions at variable speed)
0-100% linear Dimming
Linear 2-class adjustable Frost filter
Linear enlarge adjustable Focus
16-facet and 6-facet linear independent rotating Two Prisms
High speed 0-20 times/sec. shutter and strobe
540° Pan, 270° Tilt, Fast Quiet smooth move
CONTROL & CONNECTIONS
(1) DMX Channel Modes (22 channels)
16 Bit Resolution Adjustable Movement
Intelligent Touch LCD Display
3-pin DMX In/Out
PowerCON Power In/Out
DMX512, Auto run, Sound, Master/Slave
THERMAL & ELECTRICAL
550W max Power Consumption
Input voltage: 100-240V AC/50-60 Hz
APPROVALS / RATINGS
CE | RoHs Compliant | IP20
PACKAGE SIZE / WEIGHT
19.6" (500mm) Length
17.3" (440mm) Width
31.9" (810mm) Height
50.7 lbs (23 kg) Net Weight
1. Operating Environment
The product must be operated and stored in a dry environment only! Splash water, rain, humidity, fog may reduce the protective insulation which may lead to fatal electric shocks! The limit value for relative humidity is 50% at 45° C. A minimum distance of 1.5m to a fog machine must be observed; fog saturation in the room must not reduce the visibility to below 10m.
The product must be operated at a temperature range of between -5 ° C and 45 ° C only. Protect the product against direct exposure to sunlight or other heat, such as from radiators! If the product is taken from a cold environment into a warm environment it must only be taken into operation once it has reached ambient temperature, since the condensation created by the difference in temperature may destroy the device!
Protect the product against dust! Dust may reduce the protective insulation, which may cause fatal electric shocks!
The product must be operated at altitudes ranging between 20m below and 3000m above sea level only!
The product must not be operated during thunder storms; risk of destruction from surge voltages!
The product must be operated at a minimum distance of 12 m to lit objects only!
2. Installation
This product can be operated suspended or as a stand-alone system.
Should your lighting effect show any signs of damage, do not install the device! In this case, have your lighting effect repaired by your specialized dealer. The manufacturer does not accept responsibility or liability for damage to property or personal injury resulting from an improperly installation!
As a stand-alone system the device must be installed vertically on an absolute planar, firm, fireproof, shock- and vibration-free surface. The installation of this lighting effect must be carried out by trained and professional staff! The installation of this lighting must only be carried out with the appropriate materials
The suspended installation of this lighting effect necessitates a suitable suspension system! The lighting effect must never be fixed swinging freely in the room. No individuals should linger underneath the lighting effect during suspended installation!
It is a must to install this device with a second independent fixture. Such second fixture must guarantee in the event of failure of the main fixture that no assembly parts will fall down. Use the fixture on the under-surface only.
The light effect unit must be attached via two certified hooks and omega bracket to a tie-bar system• Use the screw threads on the under-surface only.
It must be ensured that an expert inspects the mechanical and safety-relevant installation prior to the initial operation and following major modifications, prior to the renewed operation. It must be ensured that an expert inspects the mechanical and safety-relevant installation at least once a year. It must be ensured that an expert inspects the mechanical installation and the installation of relevance to safety within the framework of an acceptance test at least every four years.
The installation fixture must be as such that it can withstand fora period of 60 minutes 10 times the load capacity without harmful deformation.
It is prohibited for any individual to unnecessarily stay or pass beneath the installation during any type of assembly work.
The light effect unit must be secured by a safety arrested cable if fly-mounted. The cable must withstand 12 times the weight of the light effect unit. Use arrester cables equipped with quick closing links. The dropping distance must not exceed 20 cm. Defect arrested cables or arrested cables that have already been exposed to stress must not be used.